Product manual

Page 4 For technical questions, please call 1-800-444-3353. Item 60732
Assembly Instructions
Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual
including all text under subheadings therein before set up or use of this product.
1. Locate a mounting position so the Crane will be near
end of truck bed and can be attached to frame.
WARNING! The Base must be securely bolted to the
frame of the truck bed. Bolting the Base to the truck
bed will not provide necessary support and could
result in product failure and serious bodily injury.
Note: Verify that installation surface has
no hidden components or brake lines
before drilling or driving screws.
2. Use the Base to mark drilling holes. Drill holes.
3. Mount Base to frame using Nuts (1), Spring
Washers (2), Washers (3), Mounting Plates
(4) and Bolts (5). (See Figure A.)
Base
(6)
Nuts
(1)
Spring
Washers (2)
Washers
(3)
Mounting
Plates
(4)
Bolts
(5)
Figure A
4. Slide Post (7) onto Base (6) and secure using
Large Lock Pin (9). (See Figure B.)
Base
(6)
Post
(7)
Large
Lock
Pin (9)
Figure B
5. Attach Ram (20) to Lower Post Bracket using Medium
Pin (21) and Cotter Pin (11). (See Figure C.)
Ram
(20)
Lower Post
Bracket
Cotter
Pin (11)
Medium
Pin (21)
Figure C
SAFETY OPERATION MAINTENANCESETUP