Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 60732
13. Inspect before every use; do not use if parts loose or
damaged.
14. Before driving vehicle, lower boom and position over
truck’s wheel well, then insert Large Lock Pin to
prevent boom from swiveling.
15. Attach load to Hook securely by properly rated,
suitable means, such as chains, shackles, hooks,
lifting slings, etc. Load must be attached to prevent
accidental disconnection.
16. Properly seat sling or other device in Hook and fully
close Hook’s safety clasp. Do not allow Hook hitch
to support any part of load. Do not apply load to the
point of the Hook.
17. Stay alert. Watch what you are doing, and use
common sense when operating Crane.
18. Do not use Crane while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention may result in serious personal
injury.
19. Keep children and bystanders away while
operating the Crane. Distractions can cause you to
lose control.
20. Have Crane serviced by a qualified repair person
using only identical replacement parts.
This will ensure that the safety of the Crane is
maintained.
21. Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
22. The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors, which cannot be built into this
product, but must be supplied by the operator.
Ram Safety Warnings
1. Attach securely to Crane before use.
2. Do not exceed rated capacity.
3. Do not adjust safety valve.
4. Keep clear of load while lifting and lowering.
5. Lower load slowly.
6. Be aware of dynamic loading! Sudden load
movement may briefly create excess load causing
product failure.
SAVE THESE INSTRUCTIONS.
Specifications
Rated Capacity 1,000 lb.
Boom Length, max. 53-1/2"
Boom Length, min. 33-1/2"
Chain 7-1/2" L, 3/8" Diameter
Load Hook 5/8"
SAFETYOPERATIONMAINTENANCE SETUP