Product manual

Page 2 For technical questions, please call 1-800-444-3353. Item 60732
Table of Contents
Safety ......................................................... 2
Specifications ............................................. 3
Assembly .................................................... 4
Operation .................................................... 6
Maintenance ............................................... 8
Parts List and Diagram .............................. 10
Warranty .................................................... 12
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
General Safety Warnings
1. Study, understand, and follow all instructions before
installing or operating this device.
2. Attach to frame of truck bed according to manual
instructions only. Verify that installation surface has
no hidden components or brake lines before drilling
or driving screws.
3. Engage parking brake before use. Do not move
vehicle with load attached to Crane.
4. Do not exceed rated capacity.
5. Use only slings or chains with a rated capacity
greater than the weight of the load being lifted.
6. Do not allow load to swing or drop violently while
lowering or moving.
7. No alterations shall be made to this product. Do not
adjust safety valve.
8. Keep clear from underneath suspended load. Do not
lift people or lift load over people.
9. Capacity decreases as boom lengthens. Follow
capacities marked on boom.
10. Replacement ram must have same rating, mounting
points, and maximum length.
11. Wear ANSI-approved safety goggles, heavy-duty
work gloves, and steel-toed work boots during
installation and use.
12. Do not use for aircraft purposes.
SAFETY OPERATION MAINTENANCESETUP