Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 61522
Operating Instructions
Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual
including all text under subheadings therein before setup or use of this product.
Note: Once Assembly is complete, tighten ALL Bolts before initial operation.
Bleeding Instructions
IMPORTANT! Before first use, check for
proper hydraulic fluid level and thoroughly test
the Crane. If it does not work properly, bleed
air from its hydraulic system as follows:
1. Remove Fluid Fill Plug. Fill with hydraulic fluid
(sold separately) to full level, if necessary.
2. Open Release Valve by turning
counterclockwise with Ram Handle.
3. Insert Ram Handle into Fulcrum, apply
downward pressure to Boom and pump
Handle quickly several times.
4. Check fluid level and, if necessary,
top off with hydraulic fluid.
5. Close Release Valve and replace Fluid Fill Plug.
6. Test Crane several times for proper operation
before attempting to lift a load.
7. If, after bleeding, the Crane still does not
appear to be working properly, do not use until
repaired by a qualified service technician.
Operating Instructions
WARNING! The Boom Extension has four positions. Do not lift more than
rated capacity. Be aware of dynamic loading! Sudden load movement may briefly
create excess load causing product failure and serious bodily injury.
1000 LB
700 LB
600 LB
500 LB
Fulcrum
Release
Valve
Winch
R-Pin
Hook)
Ram
Handle
Boom
Boom
Extension
Ram
Handle
Storage
Fluid
Fill Plug
Post
Pin
Pawl
R-Pin
Boom
Pin
Figure G
SAFETY OPERATION MAINTENANCESETUP