Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 61522
12. Wear ANSI-approved safety goggles, heavy-duty
work gloves, and steel-toed work boots during
installation and use.
13. Do not use for aircraft purposes.
14. Inspect before every use; do not use if parts loose or
damaged.
15. Before driving vehicle, retract Winch Cable
completely, lower boom and position over truck’s
wheel well, then insert Post Pin to prevent boom from
swiveling.
16. Stay alert. Watch what you are doing, and use
common sense when operating Crane.
17. Do not use Crane while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention may result in serious personal
injury.
18. Keep children and bystanders away while
operating the Crane. Distractions can cause you to
lose control.
19. Have Crane serviced by a qualified repair person
using only identical replacement parts.
This will ensure that the safety of the Crane is
maintained.
20. Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
21. The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors, which cannot be built into this
product, but must be supplied by the operator.
Ram Safety Warnings.
1. Attach securely to Crane before use.
2. Do not exceed rated capacity.
3. Do not adjust safety valve.
4. Keep clear of load while lifting and lowering.
5. Lower load slowly.
6. Be aware of dynamic loading! Sudden load
movement may briefly create excess load causing
product failure.
Winch Safety Warnings
1. USE TO EXTEND OR RETRACT CABLE WHILE
UNLOADED ONLY.
2. Keep clear of mechanism when operating.
3. Keep at least 4 full turns of cable on reel.
4. Before driving vehicle, retract winch cable completely,
position boom over truck′s wheel well, and insert Post
Pin to prevent boom from swiveling.
5. Attach load to Hook securely by properly rated,
suitable means, such as chains, shackles, hooks,
lifting slings, etc. Load must be attached to prevent
accidental disconnection.
6. Properly seat sling or other device in Hook and fully
close Hook’s safety clasp. Do not allow Hook hitch
to support any part of load. Do not apply load to the
point of the Hook.
7. Do not operate Crane with twisted, kinked, or
damaged cable.
Inspect cable carefully before every use.
SAVE THESE INSTRUCTIONS.
Specifications
Rated Capacity 1,000 lb.
Boom Length, max. 53-1/2"
Boom Length, min. 33"
Winch Cable Ø13/64" steel, 25' L with 7/8" locking hook
SAFETYOPERATIONMAINTENANCE SETUP