Product manual
SECURE WORK. 9. Use clamps or a vise to hold the work if possible. It’s safer than
using your hands and it frees both hands to operate the tool.
DO NOT OVERREACH. 10. Keep proper footing and balance at all times.
MAINTAIN TOOLS WITH CARE. 11. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Keep
handles dry, clean, and free from oil and grease.
STAY ALERT.12. Watch what you are doing, use common sense. Don’t operate any tool
when you are tired.
CHECK DAMAGED PARTS. 13. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and other conditions that may affect its operation. Any
part that is damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in the instruction manual.
REPLACEMENT PARTS AND ACCESSORIES.14. When servicing, use only identical
replacement parts. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS.15.
Read warning labels on prescriptions to determine if your judgment or reexes are
impaired while taking drugs. If there is any doubt, do not operate machine.
UNPACKING
When unpacking, refer to the list below. If any parts are missing or broken, please call Harbor
Freight Tools at the number on the cover of this manual.
Page 3 -- SKU: 36620
NO. ITEM DESCRIPTION QTY
NA Handle & Grip Assembly 1
05 Bracket 1
06 Lower Frame 1
07 Frame Bolt 1
08 Frame Bolt Knob 1
09 Depth Stop 1
10 Depth Stop Lock Knob 1