Product manual

Page 8
For technical questions, please call 1-800-444-3353.
Item 67119
SAFETY OPERATION MAINTENANCESETUP
Specifications
Power
1-1/2 HP
Electrical Input
120 V~ / 60 Hz / 10 A
No Load Speed
11,000 - 28,000 RPM
Collet Capacity
1/4″
Maximum Plunge
2-1/8″
Depth Measurements
1/16″ increments
Depth Stop
4-stage turret stop
E194601
93MA
Setup - Before Use:
Read the
ENTIRE
IMPORTANT SAFET
Y
INFORMATION
Y INFORMATIONY
section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the
For additional information regarding the parts listed in the
following
pages, refer to
Parts
List and Diagram
on page
14.
Functions
Depth
of Cut
Scale
Collet Nut (50)
Collet Nut (50)
Speed Adjuster (4)
Pointer
(28)
Chip Shield (70)
Chip Shield (70)
Depth
Stop Bar
(30)
Thumb
Screw
Thumb Screw (81)
Adjusting
Knob (26)
Knob (26)
Knob (26)
Spindle
Spindle
Lock
Button
(46)
Depth
Stop
Turret
(67)
Trigger
Trigger
Switch
Switch
(60)
Dust Extraction
Dust Extraction
Adapter
Plunge Lock
Lever (32)
Thumb
Thumb
Screw
Screw
(81)
Base Plate
Base Plate
Edge Guide
Spanner
Wrench (51)
Lock-on Button
Figure 1