Installation Guide

8
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
TROUBLESHOOTING
Bulb(s) will not light.
Fuse blows out or
circuit breaker trips.
1. Bulb(s) is/are burned out.
2. Power is OFF.
3. Faulty connection.
1. Crossed wires.
2. Power wire is grounding out.
1. Check wiring.
2. Check all connections.
1. Replace light bulb(s).
2. Make sure power supply is ON.
3. Check wiring and all connections.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
IMPORTANT: Shut off main power supply. Wipe with soft damp cloth. Use window cleaner to clean
glass. Do not use an abrasive cleaner on glass or fixture.
Bulb Replacement: Use 60-watt max. candelabra-base bulbs or 13-watt candelabra-base CFLs.
10.
10
Restore power and test light kit.
If light does not function, please refer to
TROUBLESHOOTING below.
Attach pull chain extension (F) to pull chain in
middle. Re-attach fan pull chain extension that
was previously removed.
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
F
Lowes.com/harborbreeze