Installation Guide

PREPARATION
ASSEMBLY INSTRUCTIONS
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to
the fixture supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
1
1.
4
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Flathead Screwdriver, Phillips Screwdriver, Wire
Strippers, Pliers, Wire Cutters, Safety Glasses, Stepladder, Electrical Tape
Required for Assembly (included with fan): Wire Connectors
Helpful Tools (not included): A/C Tester Light, Do-It-Yourself Guide, Soft Cloth
• DO NOT use bulbs having a wattage greater than the maximum value stated on the fixture. The use
of bulbs with higher wattage than specified will increase temperatures and risk of fire.
• If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type to use as well as the electrical rating required.
CAUTION
SAFETY INFORMATION
The total weight of the light kit is less than 8 lbs.
CAUTION: To reduce the risk of fire or electric shock, this light kit fitter (A) should only be used
with the compatible ceiling fan models (sold separately) listed below:
YU-C52ACF, FL52-RW, FL52ABZ5RW, WCK52XXX5N.
May or may not be followed by the suffix letter A, L, or T.
Lowes.com/harborbreeze