Data Sheet

The Haply control board is fully compatible with the Arduino IDE and programmable
through the Native USB port.
Technical Specifications
•
Measures 100mm X 59.5mm x 8mm
•
AT91SAM3X8E 32-bit ARM MCU @84MHz
•
Native USB port for programming and debugging
•
Contains 4 motor control ports
•
3.3V operating voltage
•
5 - 12V recommended input voltage
•
2A Max output current per motor port
•
Reset and Erase Button
Warning: MCU I/O pins have maximum tolerated voltage of 3.3V