Operation Instructions

·After the shoulder position is detected, the buzzer will prompt with "DiDi" sound. If
it is different from the actual shoulder position, adjust it to the appropriate position
by pressing the "Up key" or "Down key" manually. The shoulder position can be
adjusted in 11 levels. If without any adjustment within 10 seconds, it will start
massage function automatically. Or press the "ok" key directly to start massage
immediately. If the shoulder position cannot be detected, chair will start massage
at the default shoulder position height.
2.Pause key
·When the massage function is running, press the "Pause" key to stop all massage
functions temporarily; press the "Pause" key again, the massage function
continues to run the massage function. If the pause time exceeds 20 minutes, all
massage functions will turned off automatically.
Massage function run status
Massage function pause status
3.Massage intensity (3D key)
·In the massage information interface, press the " " or " " key of the 3D icon to
adjust the massage intensity of back roller. There are 5 levels.
4.Automatic function
·There are three types of automatic massage scenes with different characteristics in
automatic mode:
1)VIP Auto Program:comfort, relax, stretch, neck&shoulder, back&waist.
2)Healthcare Auto Program:full body, spine care, fatigue recovery, meridian
treatment , sedentary stretch.
3)Special Auto Program:goodnight sleep, leisure wellness, sports healing, elderly
massage, body balance.
Automatic massage function interface
· Massage intensity: 3D massage intensity, means back roller go forwarder or
backward. The intensity adjusts the specific whole area. Turn on to detect the body
shape, and the intensity of each massage point has been detected. If you feel the
intensity of a massage point needs to be adjusted, you can adjust it through this
key. In automatic and manual mode, the massage intensity can be adjusted at any
time.
Strength
06
Please adjust the position of the shoulder......
06
Shoulderpositionadjust
OK
OK
·Position too low
·Proper position
·Position too high
Key
Description
Adjust the position of the back roller upward to make it reach the
appropriate shoulder position.
Adjust the position of the back roller downwards to make it reach
the appropriate shoulder position.
Pause
Run/pause key
Description
Running status, press this key to pause all current massage
functions.
In the pause status, press this key continue to run the
massage function as pause before.
Pause
Running
level 1 level 2 level 3 level 4 level 5
Note:
Mor e
Ful l body
Rel ax
Neck&shoulder
Bac k&wai st
Spi ne care
Com fo rt
Stre tch
Manual
Angle
Customise
Setting
06
06
VIP Auto Program
VIP
Healthcare
Special
Rel ax
Str etch
Neck&shoulder
Bac k&wai st
Com fort
Method of usage Method of usage
1110
Mor e
Ful l body
Com fort
Rel ax
Neck&shoulder
Bac k&wai st
Spi ne care
06
Str etch
Manual
Angle
Relax
20min
Customise
Setting
Air strength
Relax
20min
Air strength
Mor e
Ful l body
Com fort
Rel ax
Neck&shoulder
Bac k&wai st
Spi ne care
06
Str etch
Manual
Angle
Relax
20min
Customise
Setting
Air strength
Relax
20min
Air strength