Operation Instructions

Ⅴ.The calf installation
1.After connecting wires and the air hose between the chair seat and the leg rest,
unfasten the fixed pipe belt and insert the connecting part into the seat frame(
figure 1).
2.Place the round tube from calf left and right sides to the legs brackets( figure 2).
·When pressing the power button during the massage, it will stop all the massage
functions immediately.the backrest and footrest will go back to the default position.
And when the massage time up, the massage hands will go back to the default
position, all the massage function will stop.The backrest and footrest will not go
back to he default position.
·Cut off the power of the whole machine, Figure( switch power off ).
Ⅳ. Turn off the power and stop massage
1 2
3 4
3.Then turn the legs fixing cover over the round tube on both sides of the legs (
figure 3 ).
4.Then use 2 pcs screws fix the legs on the massage chair, turn up and down to
check if there are any problems,the wires and air hose get stuck or not, finish the
installation.( figure 4 )
VI. Controller bracket installation instructions
After the screw thread on the support knob of the controller rest assembly aligns to
the screw thread position of the support mounting seat on the armrest of the
massage chair, just turn clockwise and screw tightly for fixation.
Method of usage Method of usage
2322