MT336 MASSAGE CHAIR OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 ofthe FCCRules.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warnings ·Do not allow children to touch any movable part of this product. ·Use the well-grounded power supply unit suitable for this product. ·Pull out the plug after use or before cleaning to avoid any physical injury or damage to the product. ·Operate this product as instructed in this manual. ·Do not use any parts or accessories which are not recommended. ·Do not use this product outdoors.
Warning Warning Warning Warning 04 05
·This product is designed with a set of back roller that can walk up and down and are driven by four wheels. ·There are nine simulation massage techniques including kneading, tapping, kneading&tapping , shiatsu, Knocking, 3D kneading(3D I), 3D tapping(3D lI), 3D kneading&tapping (3DIII),3D Shitasu( 3D IV). ·Equipped with automatic shoulder detection. 1.Head cushion 2.3D digital audio (builtin voice-activated microphone on the left) 3.Shoulder airbags 4.Arm air bags assembly 5.USB Charging port 6.
Introduction of remote controller Method of usage Introduction of remote controller I .Power on the whole machine 7 1 Plugging-in diagram Product connection diagram Power switch diagram of the product 2 ON 3 Relax Manual /O FF PO PO WE WE R INP R INP UT UT Customise Relax 4 Angle 8 Setting Stretch 06 II.Massage function control operation Neck&shoulder 5 Back&waist 1.
Method of usage Method of usage ·After the shoulder position is detected, the buzzer will prompt with "DiDi" sound. If it is different from the actual shoulder position, adjust it to the appropriate position by pressing the "Up key" or "Down key" manually. The shoulder position can be adjusted in 11 levels. If without any adjustment within 10 seconds, it will start massage function automatically. Or press the "ok" key directly to start massage immediately.
Method of usage Method of usage Comfort The most comfortable massage experience. Relax Gentle and comfortable deep massage to relieve physical fatigue and relax the body. Stretch The calf frame and the backrest frame are used to lift and lower the legs and waist, which can effectively relieve fatigue, relieve joint pain and restore vitality.
Method of usage Method of usage 1).Manual Technique 2).Manual- Massage area ·In the manual massage function interface, select the manual massage technique, massage area, speed and width. · Manual Technique: including kneading, tapping, kneading&tapping, shiatsu, knocking, 3D kneading(3D I), 3D tapping(3D lI), 3D kneading&tapping (3DIII),3D Shitasu( 3D IV), nine different massage techniques. The width of the back roller can be adjusted in the status of tapping, knocking, shiatsu, and stopping.
Method of usage Method of usage 3).Manual-air pressure 5).Manual-heating · Manual (air pressure): including upper body air pressure, lower body air pressure, and whole body air pressure massage functions. Click the corresponding air pressure function icon to turn on the corresponding massage function. Adjust the air pressure by clicking the " "or " "button. You can also click the " " icon to close the manual massage interface.
Method of usage Method of usage 7.Angle adjustment 3).Foot adjustment of extension ·Click the " " button icon to enter the angle adjustment selection interface, including linked seat-up, linked seat-down, calf-up,calf-down, zero gravity, foot adjust. ·Click the " " icon to close the angle adjustment interface. 角度调整 Angle Relax Key Description Footrest shortening key: Manually adjust the footrest shortening; press and hold this key to move the footrest slowly upwards, release it to stop.
Method of usage Method of usage 9.Bluetooth ·Click the" "icon to enable or disable the Bluetooth function. " Bluetooth is off, and " " means the Bluetooth is on. " means the ·After pairing and connecting a music source device with Bluetooth function (such as mobile phone, MID tablet, etc.) to the Bluetooth module of the massage chair, the music played by the source device can be wirelessly transmitted to the speaker of the massage chair through Bluetooth system to play.
Method of usage Method of usage Ⅳ. Turn off the power and stop massage ·When pressing the power button during the massage, it will stop all the massage functions immediately.the backrest and footrest will go back to the default position. And when the massage time up, the massage hands will go back to the default position, all the massage function will stop.The backrest and footrest will not go back to he default position. ·Cut off the power of the whole machine, Figure( switch power off ). 3.
Method of usage Method of usage Ⅶ.Instructions for removal and use of head cushion and backrest Ⅸ.Method of movement ·The use of the head cushion can reduce the intensity of kneading massage on the neck and shoulders.You can decide whether to use the head cushion according to your own needs(the head cushion is recommended).The backrest and the back cushion are connected by a zipper (1). The head cushion and the backrest are connected by a zipper (2). ·Make sure that all wires are far above the ground.
