485W Q.Peak DUO XL Specifications

89.4 in
2270 mm
43.1 in
1095 mm
47. 6 i n
1210 mm
1975 lbs
896 kg
20 20 29
90.8 in
2306 mm
45.3 in
1150 mm
47.4 in
1205 mm
2013 lbs
913 kg
20 20 30
α
[% / K] +0.04
β
[% / K] −0.27
γ
[% / K] −0.34 NMOT [°F] 108 ± 5.4 (42± 3 °C)
[V] 1500 Class II
[A DC] 20 TYPE 29
4
[lbs/ft
2
] 75 (3600 Pa) / 33 (1600 Pa)
−40 °F up to +185 °F
(−40 °C up to +85 °C)
[lbs/ft
2
] 113 (5400 Pa) / 50 (2400 Pa)
3
See Installation Manual
4
New Type is similar to Type 3 but with metallic frame
Certified
UL 61730
475 480 485 490
BSTC* BSTC* BSTC* BSTC*
[W] 475 519.6 480 525.0 485 530.5 490 536.0
[A] 11.08 12.12 11.12 12.17 11.16 12.21 11.20 12.26
[V] 53.15 53.34 53.39 53.58 53.63 53.82 53.86 54.06
[A] 10.55 11.54 10.59 11.58 10.63 11.63 10.67 11.67
[V] 45.03 45.02 45.33 45.32 45.63 45.62 45.93 45.92
[%] ≥ 20.5 ≥ 22.4 ≥ 20.7 ≥ 22.7 ≥ 20.9 ≥ 22.9 ≥ 21.2 ≥ 23.1
[W] 3 57.6 361.4 365.1 368.9
[A] 8.92 8.96 8.99 9.02
[V] 50.27 50.49 50.72 50.95
[A] 8.30 8.34 8.37 8.40
[V] 43.06 43.35 43.63 43.92
Hanwha Q CELLS America Inc.
400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.q-cells.us
53'
40' HC
MECHANICAL SPECIFICATION
Format
87.2 in × 41.1 in × 1.38 in (including frame)
(2216 mm × 1045 mm × 35 mm)
Weight 64.2 lbs (29.1 kg)
Front Cover 0.08 in (2.0 mm) thermally pre-stressed glass with
anti-reflection technology
Back Cover 0.08 in (2.0 mm) semi-tempered glass
Frame Anodized aluminum
Cell 6 × 26 monocrystalline Q.ANTUM solar half cells
Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in
(53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 27.6 in (700 mm), (−) ≥ 13.8 in (350 mm)
Connector Stäubli MC4, Stäubli MC4-Evo2, Hanwha Q CELLS HQC4, IP68
Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use
of this product.
Specifications subject to technical changes © Q CELLS Q.PE AK DUO XL- G10.3 / BFG_475- 490 _2021-12_ Rev04_NA
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power
during first year. Thereafter max.
0.45 % degradation per year. At least
93.95 % of nominal power up to 10
years. At least 84.95 % of nominal
power up to 30years.
All data within measurement toleranc-
es. Full warranties in accordance with
the warranty terms of the Q CELLS
sales organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m²)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
Temperature Coefficient of V
OC
Temperature Coefficient of P
MPP
Nominal Module Operating Temperature
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
PV module classification
Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730
Max. Design Load, Push / Pull
3
Permitted Module Temperature
on Continuous Duty
Max. Test Load, Push / Pull
3
41.1"
(1045 mm)
51.5" (1308 mm)
87.2" (2216 mm)
1.38" (35 mm)
4 × Mounting slots (DETAIL A)
8 × Drainage holes
0.12 × 0.24
" (3 × 6 mm)
Frame
39.5
"
(1003 mm)
NA
17.9" (454 mm)
Label
4 × Grounding holes,
Ø 0.18
" (4.5 mm)
15.7" (400 mm)
8 × Mounting slots system Tracker (DETAIL B)
DETAIL A
0.63" (16 mm)
0.33
" (8.5 mm)
0.83" (21 mm)
DETAIL B
0.39" (10 mm)
0.28" (7 mm)
0.87" (22 mm)
39.4"
(1001 mm)
31.2" (790 mm)
≥ 13.8" (350 mm)
≥ 27.6" (700 mm)
QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION
Quality Controlled PV -
TÜV Rheinland;
UL 61730, CE-compliant,
IEC 61215:2016,
IEC 61730:2016,
U.S. Patent No. 9,893,215
(solar cells)
Horizontal
packaging pallets pallets modules
Vertical
packaging pallets pallets modules
ELECTRICAL CHARACTERISTICS
POWER CLASS
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
AND BSTC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
1
P
MPP
Short Circuit Current
1
I
SC
Open Circuit Voltage
1
V
OC
Current at MPP I
MPP
Voltage at MPP V
MPP
Efficiency
1
η
Bifaciality of P
MPP
and I
SC
70 % ± 5 % • Bifaciality given for rear side irradiation on top of STC (front side) • According to IEC 60904-1-2
1
Measurement tolerances P
MPP
± 3 %; I
SC
, V
OC
± 5 % at STC: 1000 W/m²; *at BSTC: 1000 W/m² + φ × 135 W/m², φ = 70 % ± 5 %, 25 ± 2 °C, AM 1.5 according to IEC 60904-3
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
2
Minimum
Power at MPP P
MPP
Short Circuit Current I
SC
Open Circuit Voltage V
OC
Current at MPP I
MPP
Voltage at MPP
V
MPP
2
800 W/m², NMOT, spectrum AM 1.5
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
100
95
90
85
80
75
155 25200 10
YEARS
98
Q CELLS
Industry standard for tiered warranties
*
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
30
RELATIVE EFFICIENCY [%]
IRRADIANCE [W/m²]
200 400 600 800 1000
110
100
90
80
1200
Drawing not to scale