User's Manual

Check IP
You can check the IP and MAC currently used through the
DHCP server, and the connected network port.
MTS
Vehicle information, real-time location, events and video are transmitted to SSM-MTS (Mobile Tracking System).
MTS
Sets the MTS server address and whether tracking, event
notification, and JPEG push are enabled.
Vehicle
Sends vehicle information to MTS.
Using the setting icons
• : Display the ID of user connected.
•
: You can register a network camera for each channel
and easily set the resolution and the number of shots in case
of event occurrence or manaual recording.
` For more on how to register a camera, refer to "To register a camera".
(Page
30)
•
: You can manually enter the desired backup channel
and time/date to backup the recorded video.
` If you select the SEC format, you can select whether or not to “Set
Password”.
• : You can check the recording status and the status of
camera connected.
- Live : Select <Live> to check the status of camera
connected to each channel and the transmission
information.
- Recording : Select <Record> to check the following for
each channel : profile, recording type, inputs / recording
transmission rate, settings / inputs / amount of recorded
data.
- PoE : Select <PoE> to check the consumption by PoE
connected to each channel.
• < > : You will be immediately directed to the homepage of Hanwha Techwin.
English _73
● SETUP VIEWER