User's Manual

Smart Search
You can select a specific area of the image as an area of interest or exclusion using a virtual line to perform a
search of events that have occurred in a specific time period.
` To perform smart search, the <Smart Search> option in <Camera Event> should be turned <ON> and the camera motion event
option must be set to the entire area (page 42).
1. In the <Search> menu, select <Smart Search>.
2. Configure the channel, search date and time settings.
• Go to First : Moves to the oldest smart search result.
• Go to Last : Moves to the most recent smart search result.
• Event : Displays the type of event generated.
• Region of Interest : The entire screen is set as a non-detection area and a specific area designated as a
detection area. Click and drag on the image or select 4 vertexes to designate a desired detection area.
• Exclusive Region : The entire screen is set as a detection area and a specific area designated as a non-
detection area. Click and drag on the image or select 4 vertexes to designate a desired non-detection area.
• Virtual Line : Detects a motion towards a marked direction based on the virtual line. At a desired position on
the screen, click or drag the start point and end point of the line.
` Up to 3 areas of interest, areas of exclusion and virtual lines can be set, respectively.
3. Click the <Search> button.
` Search results displayed include a list, timeline and thumbnail.
` When you double-click a list or thumbnail displayed as search results, the applicable data can be played back.
4. Select data to play and click <Play>.
Moves to the playback screen for the data searched.
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
1. In the live screen menu, select the <Play> menu or click on <
> in the launcher menu.
2. Select a menu for searches.
` If this is the first time you try to play, you will start with the data search window.
For data search, refer to "Search". (Page 51)
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears on the screen.
` If there is an existing data, <Play> will start immediately without performing the search.
• Playback Information : Displays the date and time of the current data in the top corner.
• Backup : Click < > to set the current time to the start time of backup; you can specify a backup area
using the mouse (yellow triangle).
Click < > again to set the current time to the end time of the backup and the "Backup Range" window
appears.
- Type : Supports formats of NVR and SEC.
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the selected storage device.
4. If you want to go back to the live screen during plays, then click on <
> of the launcher menu.
Checking menu while playing a video
1. Right-click on the play screen.
Screen menu appears on the play screen.
2. Select a menu to run.
For more information about each menu, please refer to the "Split Mode Menu". (Page 17)
M
` Rotate mode only appears in single screen mode. You can rotate the play screen by 90 degrees.
52_ search & play
search & play