User's Manual

MTS
Sets the MTS server address and whether tracking, event notification, and JPEG push are enabled.
• Tracking : Chooses whether or not to send location.
• Tracking Interval : Selects the location transmission interval.
• Event Notification : Selects whether to send events.
• JPEG Push : When live monitoring is requested from a remote site, the video is transmitted in JPEG format.
The fps and resolution of the transmitted video follow the settings of the first profile (MJPEG) of a selected
channel on transmission request.
• Base URL : The MTS server address configured when <server address>, <port>, and <version> are entered.
• Server Address : The URL of the MTS server.
• Port : The port number of MTS.
• Version : Enter the communication protocol version of MTS.
M
` Operates only when NVR is registered in MTS. If the information is not being delivered even though the NVR was registered,
check the default URL.
` If no location information is received at system startup, the latitude and longitude are delivered as 0 degrees, 0 minutes, and
0 seconds.
` If the location information reception is lost, the last received location information is transmitted.
` Only cameras that support SUNAPI provide the JPEG push function.
Vehicle
Sets the vehicle information to be transferred to MTS.
• Company's name : Enter the company name where the vehicle is registered.
• Vehicle manufacturer : Enter the manufacturer name of the vehicle.
• Vehicle model : Enter the vehicle model.
• Vehicle ID : Enter the license plate number.
• Driver's license : Enter the driver's license number.
• Driver's name : Enter the driver name.
50_ menu setup
menu setup