User's Manual

Live Streaming Setting
You can set the video profile to be transmitted to the network.
• Profile : Select a network profile for the connected camera.
• Codec : Show the codec information for the selected network profile.
• Resolution : Display the resolution for the selected network profile.
• Frame Rate : Display the baud rate for the selected network profile.
M
` If the profiles used for network and recording are different, camera's video feed may not comply with the frame rate as
specified in the camera.
E-mail
You can send an e-mail to a NVR-registered user at a specific time interval, or if an event occurs.
SMTP Setting
Sets the SMTP mail server.
• Server Address : Enter the SMTP server address to connect to.
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
• ID : Enter a ID to use authentication when connecting to the SMTP server.
• Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from <Never> and <TLS (if available)>.
• Sender : Use the virtual keyboard to enter the sender's e-mail address.
` Refer to "Using Virtual Keyboard". (Page 26)
• E-mail Test : Conducts the test on the server settings.
English _47
● MENU SETUP