User's Manual
Setting Camera Password
You can change the passwords of all registered cameras at once.
• New P/W : Input a new password according to the password setting rules.
• Confirm P/W : Input the new password again.
M
` If you click < >, a basic guide for password setup is displayed.
` If <View password> is selected, the password is no longer hidden on the screen when you type it.
` A camera password registered with ONVIF and RTSP cannot be changed.
Password setting guide
The length and limitations of a password are as follows.
-
Uppercase letters/lowercase letters/numbers/special characters, containing at least 3 out of the 4 character
types mentioned: 8 or 9 digit combination
-
Uppercase letters/lowercase letters/numbers/special characters, containing at least 2 out of the 4 character
types mentioned: 10 to 15 digit combination
-
The password shall not be identical to the user ID.
-
To enhance security, it is not recommended to use repeated digits or letters, or keyboard patterns as a
password.
-
Special characters accepted for a password : ~`!@#$%^*()_-+=|{}[].?/
Live Setting
You can change the live transfer settings of the network camera.
•
Live Replacement : You can select the live profile setup mode.
If you select <Manual>, the profile setup items are enabled, and you can change settings manually.
-
Auto : In case of split mode, the profile for live monitoring shows the Live4NVR profile(basic: H.264 800*600
30fps) created at the time of registration and it automatically selects the second profile in case of single
mode.
-
Manual : Live monitoring is performed with the profile selected by the user from the registered camera
profiles.
-
Record : Live monitoring is performed with the profile set for recording.
•
Profile : You can select the video profile of the connected camera setting.
•
Codec : Show the codec of the selected recording profile.
•
Resolution : Show the resolution of the selected profile.
•
Frame Rate : Show the frame rate of the selected profile.
Channel Setting
You can configure the video settings for each channel.
• Apply to CH : If you select <Apply to CH>, the "Apply to CH" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
•
Video
-
<ON/OFF> : You can turn ON/OFF the selected channel's camera.
-
<Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
-
<Covert2> : Shows nothing but an empty screen while the recording continues.
English _35
● MENU SETUP