User's Manual

Special
DIS (shaking compensation), use of Defog levels can be set.
Focus
You can adjust the focus of you camera's video.
Items of Simple Focus and Focus-Initialize Setting can be set.
Flip
Mirror and flip modes can be set.
After finishing with setting camera, click on the <Close> button to move back to the previous screen.
Dewarping Setup
Press <Dewarping Setup> at the bottom of the camera settings screen and a distortion correction settings
window for each channel is prompted.
• Profile/View type : You can select the view type of profiles, except for fixed profiles (SourceMJPEG,
SourceH264, DewarpMJPEG, DewarpH264) whose settings can't be changed, in the profile list on the
distortion correction settings pop-up window.
• Mounting mode : You can change the fisheye installation type. You can select a view mode from among
CEILING/GROUND/WALL depending on the installation location.
• View : You can change the fisheye view mode of the current screen according to each split section.
M
` If there is no camera registered in the NVR that supports fisheye view, <Dewarping Setup> will not be available.
Dewarping Setup
CH6
The camera may be rebooted when changing the mounting mode.
Profi le
Live4NVR
Rec4NVR
MOBILE
View type
Dewarp View
Source View
Source View
Mounting mode Ground
View Quad View
CancelOK
How to set WiseStream
Function to analyze the complexity of the video and effectively reduce the data size while maintaining the
quality. For details, refer to the camera's help or the product's user guide.
Press the <WiseStream Setup> button at the bottom of the camera setup screen to display the WiseStream
setting popup window for that channel.
• Channel : You can select the channel to set WiseStream.
•
Mode : You can choose the degree of video compression. You can choose either OFF, Low, Medium, or High.
M
` <WiseStream Setup> cannot be executed if there is no camera registered in NVR that supports WiseStream.
How to set the variable GOV/FPS
Variable GOV is a function that automatically changes GOV length according to the video situation. For details,
refer to the camera's help or the product user's guide.
Press the <Dynamic GOV/FPS Setup> button at the bottom of the camera setup screen to display the
Variable GOV/FPS setting popup window for that channel.
• Profile : Shows the video profile of the connected camera setting.
• Dynamic FPS : Set the FPS value to automatically change to the setting value of the maximum dynamic FPS.
• Dynamic GOV
- Mode : Set the GOV length to change automatically.
- Length : Enter the maximum GOV length value to be applied when there is no motion in the video.
Minimum GOV value can be set on the camera web page.
- Range : The range of the input value of <Length> is displayed.
M
` Profiles that do not support variable GOV/FPS setting are displayed as <
-
>.
34_ menu setup
menu setup