User's Manual
If you want to register a camera in PoE mode
J
` The camera connected to the PoE port of the NVR must be set to DHCP mode.
` Samsung cameras are registered for Samsung protocols and other cameras are registered by using the Onvif protocol.
` A device in which the DHCP server is running should not be connected to the PoE port or camera configuration port. (e.g.,
Wi-Fi hub)
To auto-search for and register a network camera
1. In the <Cam Registration> field, click on the <Auto> button.
2. Search for a network camera connected.
` An already registered camera will be marked in blue in the list.
` If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as -192.168.1.100),
then press the < > button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to assign
the IP manually.
3. Select a camera from the camera list to see a preview of its current video feed.
` Camera searched with ONVIF does not provide previews.
4. Check the checkbox next to a network camera that you want to connect to.
` You can select all of the network cameras in the list and provide <ID> and <Password> all at once.
` Click a header at the top of the list to sort the list according to that header.
J
` Registering camera with user account other than admin may restrict camera function.
` When you change the camera ID/password in the camera web viewer, if the camera is already registered in NVR, you also
have to change the camera ID/passowrd information registered in NVR.
SETTING THE DEVICE
You can configure settings related to camera, storage media, monitor.
Camera
To register a camera
You can register a network camera for each channel and make connection between.
•
Preview : View the video of the channel as a current image.
` Camera searched with ONVIF does not provide previews.
•
Protocol : Show the protocol information of a registered network camera.
•
Model : Show the camera model name.
•
IP Address : Display the IP address of a network camera.
•
Connection : Display the connection status.
•
Data Rate : Displays the total amount of data received by the channel.
•
PoE Status : Displays connected PoE status information.
•
ONVIF Setup : You can additionally set up ONVIF protocol camera.
•
Error code guides : You can check the details of generated error codes.
M
` If the NVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras.
For more information on network settings, refer to "Network Configuration". (Page 43)
30_ menu setup
menu setup