User's Manual

24_ live
live
Preset
Preset is a specific position remembered by the PTZ camera. You can use the Preset function to define up to
300 presets for a single PTZ camera.
To add a preset
1. Check the preset checkbox.
2. Select < >.
The virtual keyboard will appear on the screen. Use it to provide the preset name.
` Refer to "Using Virtual Keyboard". (Page 26)
•
: You can change the preset settings to your preference.
•
: Delete a selected preset.
•
: Delete all the existing preset settings.
M
` You can add up to 300 presets, which is the max count supported by the NVR.
` If you replace a camera that saves your preset settings with a different one, you must configure the preset settings again.
3. Select <OK>.
The preset setting will be saved in the provided name.
To change or delete a registered preset
1. Check the preset checkbox and select a preset to change or delete.
2. Press < > or < > as needed.
•
: Delete all the existing preset settings.
J
` If you delete the entire presets, the default presets specified in the network camera can be deleted accordingly.
3. Provide a new name and press <OK>.
BACKUP
You can check the backup device and set the backup schedule by channel or by time.
1. Select <Backup> from the live screen menu.
You can click on <
> in the launcher menu.
2. The backup settings screen will be opened.
• Channel : Sets the channel to backup.
` You can select multiple channels.
If you select <All CHs>, all channels will be selected.
• Backup Range : Sets the <Start> and <End> time for the backup.
• Overlapped Data : Shows a list of overlapping data on a same time according to the number of data.
It appears when one channel has multiple data on a certain time point due to changing of time or time zone
settings, etc.
` Refer to time and time zone of “Setting the Date/Time/Language”. (Page 25)
• Device : Select a backup device from the recognized devices.
• Type :
Saves data in the proprietary format with built-in viewer, which supports immediate playback on a PC.
` If you select the SEC format, you can select whether or not to “Set Password”.
• Path : displays the location of the folder in which the backup file is to be saved.
• Check capacity : Shows the size of the selected backup data, used and available capacity of the selected
backup device.
3. When the backup setup is done, press <OK>.
` If no available device is recognized for backup, <OK> button is not activated.
J
` The application may slow down during the backup.
` You can switch to the menu screen during the backup in operation, but playback of data is not available.
` The data can be played back on a Webviewer while the backup is in progress but audio does not function.
` If backup has failed, select “Device > Storage Device” and check the free space of the HDD and check also if the HDD is
properly connected.
M
` Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.