User's Manual

18_ live
live
View the Launcher Menu
The Launcher menu appears on the bottom of the live screen.
1. Select <Show Launcher> in the context menu of the Live screen.
2. Move the cursor to the bottom and click a desired item in the Launcher menu.
M
` If no input is entered for 10 seconds, the menu will disappear.
` The Launcher menu can be accessed only by using the mouse.
Menu Description

Layout Select the layout to be displayed on the screen.
b
Layout Setup You can set, change or delete the new layout of each channel.
c
Screen Mode
Displays a list of split modes available in a bar type.
The current screen mode will be displayed grey.

Menu Expansion
Button
Click to display the hidden menu to the right.

Backup
Searches for a backup device and runs backup of each channel or schedule it for later at a more
desirable time.

Zoom Enlarges the selected area. This is available only in Single Live mode.

PTZ
If the network camera connected to the selected channel supports the PTZ operations, this will run
the PTZ control launcher. This is active only in Live single mode.

Alarm Stops the alarm if it's activated.

Freeze Freezes the Live screen temporarily.

Capture Captures the screen of the selected channel.

Play Enters Play mode if a file to play exist, and if not, enters Search mode.

Record Start/End recording the Live screen.
LIVE SCREEN MODE
You can play up to 16 live video channels in single, 8-split, or auto sequence mode.
M
` When you register a camera, the Live4NVR profile is created to set H.264 800*600 30fps as default. If necessary, you can
change it in Menu > Device > Camera > Camera Settings. If the performance is exceeded, it may play I frame only.
If you cannot create an additional profile for the camera specifications, then sometimes you cannot create Live4NVR. In this
case, you need to modify the camera profile. Refer to "Camera Setting". (Page 33)
Method for displaying screen mode
If you want to change the split mode, select a screen mode suggested in the launcher menu or right click with
the mouse button and select a split mode in the screen mode menu.
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2 CH3
16-split mode 9-split mode 4-split mode 3-split mode
CH1 CH2
CH2
CH1 CH3
CH4 CH5 CH6
CH2
CH3
CH1 CH4
CH5 CH6 CH7 CH8
CH2 CH3 CH4 CH5
CH6 CH7
CH8 CH1 CH9
CH10 CH11 CH12 CH13
2-split mode 6-split mode 8-split mode 13-split mode
CH1 CH1
Auto Sequence Single mode
Switching the split mode
You can also play 16 Live channels in the sequence of: Single, 4-split, 9-split and 16-split mode.
Press the button in the launcher or use the right menu to
automatically switch the screen.
Mouse right button menu  Screen mode  Auto switching
mode
If you reach the end of the steps as outlined in the previous
page, you will be moved to the first page and no automatic
switching will be performed.

c b        
Scene Mode

Layout ►
Keep full scr ratio
Status ►
Audio Off
Freeze
Stop Alarm
Record Stop
Play
Search
Backup
Menu
Shutdown
Logout
Hide Launcher
16-split
9-split
4-split
3-split
2-split
6-split
8-split
13-split
Auto Sequence