User's Manual

English _11
● INSTALLATION
2. Loosen the screws on the front/rear of the bracket
and separate the bracket.
3. After replacing/installing the HDD, fix the HDD and
bracket with screws.
4. Slide the bracket with the HDD into the main body,
and tighten the screws to fix it.
Cautions when installing a HDD
1. Do not apply excessive force to the HDD.
2. Pay attention so as not to lose the disassembly screws or accessories.
` If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.
3. Please check the HDD compatibility before adding a HDD.
` Please contact your nearest dealer to obtain the list of compatible devices.
Installing the HDD
J
` If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new
HDD manually in the set before use.
For information on how to format an HDD, refer to "Device/Format". (page 36)
1. Unscrew the HDD bracket fixing screws on the front
of the set and pull it to the front to separate the HDD.
` If the lock on the front is locked, open the lock using the key
that was provided when you purchased the product.
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
ER
REC
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI