User's Manual

English _ 5
CONTENTS
contents
PRODUCT INTRODUCTION
7
7 Features
8 What’s included
9 At a Glance
10 Cable Color Scheme
INSTALLATION AND EXTERNAL
CONNECTION
11
11 Cable Selection
12 Bypass Diode Connection
12 I/O Connection
14 External Reader Connection
INITIALIZATION
15
15 Basic Operations
16 Initialization
16 Forced Initialization with External Line
READER MODE SETUP
17
17 Reader Mode Setup (RF ONLY)
18 Reader Mode Setup (RF + P/W)
18 Reader Mode Setup (PIN ONLY)
19 Reader Mode Setup (RF/PIN Combination
Mode)
19 Enabling Keypad Input for the Card Number
USER MANAGEMENT
20
20 To register cards in RF ONLY mode
20 RegIsterIng cards In a combInatIon of RF and
P/W modes
21 To regIster cards In PIN mode
21 RegIsterIng cards In RF card / PIN
combInatIon mode
22 To delete a regIstered card or PIN number
BASIC SETUP
23
23 Duress Alarm
23 To specify the retry count for an unregistered
ID
24 To specify the keypad input suspension time
if the retry count with an unregistered ID
exceeds the limit
24 To specify the delayed start time in Secure
mode
25 To specify the operation time of the Door
Contact Sensor
25 To specify the limited time for the keypad
input
26 To specify the alarm output port for the
dismantled device
26 To open or close the entry door
27 To set or release the QUICK mode
27 To set or release the Toggle mode for the
door relay