User's Manual
20_ user management
user management
TO REGISTER CARDS IN RF ONLY MODE
Ensure that you must have registered the Master Card and the device is specifi ed in RF ONLY mode.
Present the Master Card to the device.
When the mode is specifi ed, only the green LED indicator fl ashes.
Press Button
and Button in sequence and press .
When the device enters Standby, only the red LED indicator fl ashes.
Present a card to the device, it will be registered with a beep.
Repeat this step if you want to register multiple cards.
Present the Master card to the device again, and the device will switch to normal
mode. If no input is made for 20 seconds, the device will switch to normal mode.
REGISTERING CARDS IN A COMBINATION OF RF AND P/W MODES
Ensure that you must have registered the Master Card and the device is specifi ed in RF + P/W mode.
Present the Master Card to the device.
When the mode is specifi ed, only the green LED indicator fl ashes.
Press Button
and Button in sequence and press .
When the device enters Standby, only the red LED indicator fl ashes.
Present a card to the device, enter the 4-6 digit password and press
.
Repeat this step if you want to register multiple cards.
Present the Master card to the device again, and the device will switch to normal
mode.
If no input is made for 20 seconds, the device will switch to normal mode.
1.
2.
3.
4.
1.
2.
3.
4.
SSA-S2000V SSA-S2000V SSA-S2000V SSA-S2000V
ÎÎÎ
t
Gj
SSA-S2000V
tGj
SSA-S2000V SSA-S2000V SSA-S2000V
ÎÎ
tGj
SSA-S2000V
tGj