User's Manual
16_ initialization
initialization
INITIALIZATION
If you have the Master Card registered, you can use it to initialize the device.
Present the Master Card to the device.
Press the
button twice and press .
The system will restore the factory default settings with all LED indicators
blinking.
Initializing the system will lose all data.
If the product works abnormally, use initialization to restore the default settings.
FORCED INITIALIZATION WITH EXTERNAL LINE
Turn off the product, shortcircuit between the green line and
the orange line with white stripes, and turn it back on.
When the initialization is completed, 3 LED indicators are
blinking with a beep.
Restore the connection of the two lines back to their original
state.
1.
2.
3.
M
1.
2.
3.
SSA-S2000V
tGj
SSA-S2000V
SSA-S2000V
12V
GND
Green
Orange with white stripes
Connect
(Short-
circuit)