User's Manual

8_ product introduction
product introduction
CABLE COLOR SCHEME
Name of I/O Pin Signal Line Cable Color
Power (+12V) DC +12V Red
Power Ground GND(-) Black
Wiegand Data Output 0 WIK_DATA0 Green
Wiegand Data Output 1 WIK_DATA1 White
Not used. Not used. Orange
RS-232 TX TX OUT Purple
Not used. Not used. Brown
RS-232 GND GND Black
LED Control Green LED Control Yellow
LED Control Orange LED Control Gray
Buzzer Control BUZZER Control Blue
Tamper Switch COM Tamper COM Pink
Tamper Switch NC Tamper NC Light yellow
CABLE SELECTION
Item
Cable Type
Cable Type
1
Power (DC12V)
Belden #9409, 18 AWG 2 Conductor, Unshielded
Belden #9409, 18 AWG 2 Conductor, Unshielded
2
Card/PIN data (Wiegand)
Control Signal (LED,BUZZER)
TAMPER
Belden #9512, 22 AWG 4 Conductor, Shielded
Belden #9514, 22 AWG 8 Conductor, Shielded
3
RS-232 Cable
Belden #9829, 24 AWG 2-twisted pair, Shielded