User's Manual

10
· English
To check before installing
• Check your in-home chime whether it is a mechanical or electrical one.
• It is expected most of current mechanical chimes work properly except for one
with a special feature, etc.
• Check out the compatible chime list on the website which is updated on
monthly basis.
Installing Power stabilizer
Connecting Power stabilizer to existing mechanical
chime.
1. Find a breaker to cut off the electricity
2. Find existing chime bell in the house. (following
your sound)
3. Open the chime cover and unscrew the
[FRONT] [TRANS] wires with a screwdriver.
4. Connect the supplied power cord to the power
stabilizer socket.
5. Open the holding pins of the enclosed two connectors,
connect the wire pulled out from [FRONT], and close the
holding pin.
6. Connect each “L” connectors to each of the two wires inside the chime.
7. Place the power stabilizer in a suitable place inside the chime. (If there is no
space, attach a double-sided tape to the outside.)
8. Close the chime cover.
FRONT
TRANS
REAR