SMARTCAM D1 User Manual SNH-V6435DN
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Smartcam D1 User Manual Copyright ©2017 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered.
Instructions & Warranty The manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product. Such modification will void the warranty of the product as well as the user’s right of use. WARNING • The product must be assembled and installed by an adult. • Before using, read all instructions on this manual thoroughly and follow operational instructions, warnings on this manual and printed on the product.
Contents Getting Started Features………………………………………………………… 5 What’s Included………………………………………………… 6 Part names and functions……………………………………… 7 Installation & Network Connection Installation……………………………………………………… 9 Network Connection and Settings……………………………… 13 Appendix Specifications…………………………………………………… 15 Troubleshooting………………………………………………… 19
Features 01 • Remote monitoring -- You can monitor your SmartCam D1 remotely, at any time and from any location, using your smartphone. • Real-time alarm -- When the bell rings, a push alarm is sent to the smartphone. • Face recognition -- You can set the person who wants to receive the alarm. • Downloading a recorded video -- You can download motion detection/audio detection/manually recorded video to the user's smartphone (Android).
What’s Included Check for components when opening the product package.
Part names and functions Front 01 Rear Deco Case Getting Started This is a case mounted on the exterior of the SmartCam D1 Microphone hole Status LED Bell Button Power Input This is the AC adapter connection terminal.
Side Components WiFi Direct Button Wi-Fi is used for wireless communication between product and smartphone. RESET Reset button Resets the product settings to the factory default. The system restarts if you press the button for 10 seconds using a pointed object such as a needle. J `` Speaker hole 8 · English If you press too strongly, the button can break.
Installation Precautions To check before installing 차임벨 설치하기 SmartCam D1 Installation Network Connection and Settings RESET Precautions Connection using the Wi-Fi Direct function Precautions 1. As this product works on a Wi-Fi network, video receiving may be unstable if there is an obstacle (metal, wall, door) in the use environment, or if the product is receiving interference from another Wi-Fi device nearby.
To check before installing 4. Connect the supplied power cord to the power stabilizer socket. 5. Open the holding pins of the enclosed two connectors, connect the wire pulled out from [FRONT], and close the holding pin. 6. Connect each “L” connectors to each of the two wires inside the chime. • Check your in-home chime whether it is a mechanical or electrical one. • It is expected most of current mechanical chimes work properly except for one with a special feature, etc.
SmartCam D1 Installation Disassembling JJ `` Check whether or not the camera installation position is suitable for good video reception. Loosen the screws at the bottom of the product using the screwdriver as shown. 2. Pull apart the casing by pulling it apart. When installing SmartCam D1, connect the Power Adaptor to Chime bell. When not connected, Some functions of SmartCam D1 and Chime Bell may not work properly. nn `` Only 16 to 24 volts AC power installed on the existing chime.
Assembling ❖❖ LED status LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator. Color Red Red Blinking Yellow Blue Blinking Blue Green Purple Status Booting up 1. JJ `` `` Booting completed / Establishing network connection Enabling Wi-Fi Direct Connecting to the network. Updating firmware Network connection Be careful not to get injured while drilling. Insert an anchor for the two holes.
Network Connection and Settings Precautions What is Wi-Fi Direct? If you use Wi-Fi Direct, the product can be connected to the router without using wires. 1. Connect the power adapter to the product. 2. When the power is connected, the power status LED lights up in red and starts blinking when boot-up is complete. 3. If you press and hold the Wi-Fi Direct button for 5 seconds, the LED will illuminate in yellow. 02 Wi-Fi Direct Button Mobile 4.
Creating an Account and Registering a SmartCam D1 With the Wisenet SmartCam+ app, users can monitor the SmartCam D1 from a mobile device. 1. 2. Go to Google Play/App Store and search for “Wisenet SmartCam+”. Download the application and install it on your mobile device. 3. Run the downloaded application. 4. After completing member registration, register the SmartCam D1 as instructed on the screen. nn `` For more details, refer to Wisenet SmartCam+ mobile guide.
Appendix Specifications Specifications Product Appearance Troubleshooting 15 15 18 19 Specifications Video Item Description Imaging Device 1/2.8" CMOS Total Pixels 2065(H) x 1565(V) Effective Pixels 2065(H) x 1553(V) Scanning System Progressive Min. Illumination B/W : 0 Lux with IR Focal Length 2.29mm Max. Aperture Ratio F 2.2 Angular Field of View(H / V / D) D : 154.3˚ / H : 125˚ / V : 94.8˚ Min. Object Distance 0.
Operational Item Description Item Description Alarm Triggers Combination of events (Body Detection + Motion Zone Selection) ※ Customizable Event action IR LED 850nm Viewable Length 5m Alarm Events Motion Sensor N/A Push Alert (Mobile Device) Notification via e-mail Camera Title Off / On (Time display) Memory Slot N/A Day & Night True D/N Cloud Storage Support (for North America only) Wide Dynamic Range Off / On Booting Time Max 30sec Contrast Enhancement Auto Factory reset Supp
Item Description VBR ATC(Auto Transmission Control) Streaming Capability Multiple Streaming (Up to 4 Profiles) TBD Audio I/O Built-in Mic and Speaker Audio Compression Format G.711 u-law Audio Communication 2-way audio / Full duplex IP IPv4, IPv6 Protocol TCP/IP, DHCP, SMTP, DNS, RTSP, RTCP, RTP, HTTP, TCP, UDP, STUN, TURN, XMPP, SIP, uPNP, ICE, SNTP, IPv4/v6, ICMP, Bonjour Security HTTPS(SSL) Login Authentication Streaming Method Unicast Max.
Product Appearance unit: mm (inch) 18 · English unit: mm (inch)
Problem Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below: Problem I forgot my user ID/ password. Action -- Move to “Log-in page Forgot your ID/Password?”, and enter the registered e-mail address to which we will send you the user ID and/or a new password. It can be spammed out depending on the policy of the email server.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.wisenetlife.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Tel +1.877.349.3149 www.wisenetlife.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel#1 00800.801.08022 Tel#2 +31.77.326.1580 www.wisenetlife.
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. If the device is going to be operated in the 5.
Industry Canada Caution (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250- 5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.