User's Manual

20 · English
Connection using the Wi-Fi Direct function
What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a
cable.
1. When the power is connected, the power status LED lights up in red and
starts blinking when boot-up is complete.
2. Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the
color of the LED will change to yellow/orange.
3. Register and select a camera, referring to the instructions in the mobile guide.
4.
When the camera connects the server, the LED turns green.
5. Set up the wireless network environment in accordance with the <Wireless
Network> guidance on page. 31.
n
` The camera can only be registered via mobile.
` You can connect in relay mode if the router doesn't have UPnP.
Configuration may differ depending on the router model. Please refer to the router
manual.
` Please contact the service provider if you have difficulty connecting to the Internet.
Mobile<Wireless Router>
Wi-Fi Direct Button