User's Manual

10 · English
Power Supply
Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
n
`
Make sure to use the provided power adaptor. If you use an adaptor other than the
power supply adaptor provided in our package, the product may not operate properly.
` It takes about 30 seconds to reboot the camera completely.
` When the camera is turned on, the LED blinks red.
❖
LED status
LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.
Color Status
Red Booting up
Red Blinking Booting completed / Establishing network connection
Blue Blinking Connecting to the network.
Blue Local connection established
Green Connection to server completed / Normal operation
Yellow/Orange Waiting to connect with a wireless router
Purple Updating firmware