Manual

English _41
●
네트워크
설정
●
SETUP SCREEN
Installing the certificate
1. Enter the certificate name.
2. Select the certificate file to be installed and certificate key, and click [Install (
)] button.
Deleting the certificate
1. Click [Delete (
)] button.
2. To delete a public certificate, you should access the network video decoder in the mode of <HTTP (Do not
use secure connection)> or <HTTPS (Secure connection mode using a unique certificate)>
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install the certification.
1. From the Setup menu, select the <Network (
)> tab.
2. Click <802.1x>.
3. Set the <IEEE 802.1x setting(EAPOL using EAP-TLS)>.
• Enable IEEE 802.1x : Specify the use of the 802.1x
protocol.
• EAPOL version : Select version 1 or 2.
• ID : Enter the client certificate ID.
• Password : Enter the client private key password. If the
key file used is not encrypted, you don’t need to enter it.
J
 If the connected network device does not support the 802.1x protocol, the protocol will not operate properly even if
you set it.
4. Install/remove the certificate.
• CA certificates : Select a public certificate that contains the public key.
• Client certificate : Select a public certificate that contains the client certificate key.
• Client private key : Select a public certificate that contains the client private key.
5. When done, click [Apply (
)].
To install/remove 802.1x related certificates
1. Press the [Browse (
)] button for each item and select a certificate to install.
2. If no certificate is installed, you will see “Not Available” appearing next to the selected item.
3. Press the [Install (
)] button to start installation with a message of “Installed” next to the item.
4. Press the [Delete (
)] button to remove the certificate.