Manual

English _23
● NETWORK CONFIGURATION
Setting up Port Range Forward for several network cameras
When several network cameras are connected to one Broadband Router device, you should forward the TCP
943 port of the router to the TCP 943 port of a connected camera.
M
 TCP 943 port is a port for the Silverlight policy server of a camera, you cannot change the Silverlight policy server port
of a camera.
 Set manually in router setup menu to set port forwarding.
Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play)
function.
After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in the “Setup 
Network  DDNS” menu.
User
Internet

Broadband Router
Start End Protocol IP Address
943 943 TCP 192.168.1.100
3000 3000 TCP/UDP 192.168.1.100
3001 3001 TCP/UDP 192.168.1.101
4520 4520 TCP/UDP 192.168.1.100
4521 4521 TCP/UDP 192.168.1.101
8080 8080 TCP/UDP 192.168.1.100
8081 8081 TCP/UDP 192.168.1.101
Camera1 (192.168.1.100)
HTTP Port
8080
Device port
4520
RTSP Port
3000
Policy Server Port
943
Camera2 (192.168.1.101)
HTTP Port
8081
Device port
4521
RTSP Port
3001
Policy Server Port
943



DDNS
Server
Internet
Modem
Router
External remote
monitoring PC
Network camera1 Network camera n
...