User's Manual

English · 9
Problem Solution
No picture from a
camera
1. Check all connections to the camera. Make sure the adapter
is plugged in.
2. Make sure that the cameras and monitor are both ON.
3. Make sure that the camera is in range of the monitor.
4. Make sure the camera and monitor are paired.
5. Adjust the monitor antenna to a vertical position.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower
frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to a vertical position.
No sounds (even
with both units
turned on)
1. Make sure that the power adapter is connected to the
camera.
2. The battery on the monitor may be dead, be sure to charge it
using the adapter included.
3. The monitor may be out of range from the camera.
Your BabyView
Eco is emitting an
high pitched noise/
feedback.
This sound signifies normal feedback which occurs if the monitor
and camera are too close together.
Move the units apart, and the monitor will not emit high pitched
noise/feedback.
Monitor screen is
frozen.
Restart your monitor and check the connection to the camera.
If the baby monitor displays the "Out of Range" message, move
the monitor closer to the camera.
n
` Low battery will cause the supply current to become unstable and will affect
the quality of the video/audio. Please charge the battery fully for superior video.
Trouble Shooting
Product Specifications
Item Details
System General
Operating Frequency Range 2400 MHz~2483.5 MHz
Type of Spread Spectrum TX FHSS
Type of Modulation GFSK
Number of Cameras Supported Up to 4 cameras
Data Rate 4Mbps
Transmission range Up to 900ft (line of sight, no obstruction)
Regulation Compliance FCC/CE(RoHS)
Operating Environment 32
o
F~+104
o
F / 85% RH / Indoor use only
Wireless Camera
Image Sensor Type 1/4” Color CMOS Image Sensor
Effective Pixel 640x480 (VGA)
Image Compression MJPEG
Lens
EFL=3.95mm, F=2.2
(Viewing Angle (D): 55-degrees)
Night Vision 16 ft. (5m) in the dark with 8 non-visible IR LEDs
White Balance Auto
Lullabies 4 songs + 3 white noises (Remote On / Off)
Pan Angle 295
o
Tilt Angle 110
o
(+80
o
/ -30
o
)
Temperature sensor Yes (+/-2 degree)
Power Requirement DC 5V ±10%
Power Consumption 4.3Watt (max)
VOX level detection Low: 50dBA / High: 65dBA
Audio Built in Microphone/ Speaker
Wireless Monitor
Display Information 4.3" 480x272 Color TFT
Digital Zoom X1 , X2
Real Time Clock (RTC) +/- 3sec / day
Power Requirement Adapter : DC 5V ± 10%, Battery : 3.85V
Power Consumption
4.0Watt (max)
Audio Built in Microphone/ Speaker
Rechargeable Battery 2100mAh Li-ion Polymer
Battery time duration Monitor On: 5.5 hours / Audio Only: min. 10 hours