User's Manual

English · 7
Button Description
No. Icon Name Description
l
Feed time
Display
Reminder for baby's feeding time.
m
View menu Select camera / viewing mode.
n
Cam volume
menu
Set camera volume 1~5 level.
o
Temperature
menu
Select temperature to display on / off /
setting.
p
Vox sensitivity
menu
Set VOX OFF, low or high sensitivity.
q
Feed timer
menu
Set the feed time shown on the
monitor or off.
r
Pairing menu
Select cam 1~4 you wish to pair or
unpair.
s
Time & Reset
Set time or reset monitor to the factory
settings.
Functional Description
VOX (Voice activated)
Select to monitor and listen for significant sound levels with reduced
ambient noise.
The screen goes off in “VOX” mode if there is no significant sound louder
than a certain level about 30 seconds. The monitor screen turns back on as
soon as it detects sound around the camera.
In “VOX” mode, you can set the sensitivity.
• Low Sound Level Detection : Sets to higher sensitivity.
• High Sound Level Detection : Sets to lower sensitivity.
ECO Mode
Energy-saving mode. The screen goes off in “ECO” mode if there is no
significant sound louder than a certain level about 30 seconds. And in ECO
mode, the monitor doesn't deliver any back ground sound and the camera
enter the power saving mode. The RF radiation will also decrease. The
monitor screen turns back on as soon as it detects sound around the
camera.
Video Mode
The screen is always on in “Video” mode, monitoring the video and audio
around the camera.
Audio Mode
The screen goes off in “Audio” mode, monitoring the audio around the
camera only, the screen will be turned on when any buttons on the monitor
are pressed.
No Signal Warnings
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
When your baby monitor displays the "Out of Range" message, please
move the baby monitor closer to the camera.
Sequence View
Select view menu to enter sequence views. It will start at Cam1, and will
automatically switch to the next camera, Cam 2, after 10-seconds.
The "Sequence View" will continue to change between cameras. If you
want to see the detail from current viewing camera, then you just press OK
button.
Monitor
` Mode button: To change mode "VOX - ECO - VIDEO - AUDIO -
VOX". Mode setting: OK button press or 5 sec time out.
` Power button: 1) Long pressed it 2~3 second to turn on/off monitor
2) In the OSD mode, press it to return to the previous interface.
` Lullaby button: 1) Show a list of lullabies ( 1~4: lullaby, 5~7: White
noise, All: whole lullabies of 1~4).You can play the lullabies with
pressing OK button 2) Stop and remove the lullaby list from the
screen.
` Talk button: Pess and hold it to speak.
` OK button: 1) Display menu and confirm 2) In view mode, each time
you press and hold the OK button, it will zoom in and out sequentially.
` Direction button: 1) Select menu 2) In view mode, left & right button
to adjust monitor brightness, up & down to adjust monitor volume.
Camera
` Reset button : Press the reset button ≥ 3sec to reset the camera.
` Power switch: Turn on/off the camera.
` Pair button: To pair camera and monitor.