User's Manual

English · 5
Pairing Camera and Monitor
The units already come paired for your convenience.
The pair button is used to pair additional cameras. Users can assign
numbers to the cameras. Up to 4 Cameras may be paired.
If you have additional camera, pair your camera as follow:
1. Power on wireless monitor and wireless camera.
2. Press "OK" button to make the settings icon appear on the screen.
3. Select [
] icon.
4. Select camera number.
The monitor will search for the camera when set to pairing mode.
A countdown clock will appear in the middle of the screen and will
start counting fr
om 30 to 0.
5. Press the [PAIR] button found on the rear of the camera.
6. If the monitor successfully pairs with the camera within the 30
seconds, the monitor will automatically switch to the camera's
current view.
1. Fully charge the system before use. Camera must be plugged in at all
times.
2. Push the power button for about 2-3 seconds to turn on the monitor.
3. To turn the camera "On", turn on the power switch located on the back
of the camera. A red LED indicator will illuminate if it is turned on.
Powering Your system
Monitor Camera
PAIR
n
` You can use the monitor while it is charging .
` Fully charged time (Monitor - 50 ~ 60min)
After opening the box, fully charge the monitor before use. After initial charge,
recharge as needed.
Getting Started