RealVIEW User Manual SEW-3042W English
IMPORTANT SAFETY INSTRUCTIONS RealVIEW User Manual 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Caution : Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents WHAT’S INCLUDED Package Contents ………………………………………………… 5 INSTALLATION How to Install ……………………………………………………… 14 Wireless Monitor …………………………………………………………… 14 GETTING STARTED Functional Description ……………………………………………… 6 Powering your monitor ……………………………………………………… 6 Operating the System ……………………………………………………… 6 Wireless Camera …………………………………………………………… 14 APPENDIX Specifications …………………………………………………… 15 Troubleshooting ………………………………………………… 16 VIEWING MODE DISPLAY Indicator Description ……………………………………………… 8 H
01 WHAT’S INCLUDED What’s Included Package Contents The system comes with the following components: Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Screws (2EA) & Plastic anchors (2EA) Check your package to confirm that you have received the complete system, including all components shown above.
GETTING STARTED Operating the System Functional Description Pairing The basic operation is as follows: Powering your monitor The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. 1. Power on wireless monitor and wireless camera. The power LED for the monitor should be ON. 2.
Sound level Select to monitor significant sound with reduced ambient noise. The screen goes off in “VOX” mode if there is no significant sound louder than a certain level about 30 seconds. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In “VOX” mode, you can set the sensitivity. The louder the sound around the camera, the more LEDs turn on. Multi camera mode Press [ / ] switch the split mode. According to the paired camera, screen split mode is different.
VIEWING MODE DISPLAY Indicator Description x1/x1.5/x2 Zoom mode Indicates that current screen is Zoomed in. Press [ zoom back out. ] icon on the monitor to Night Vision Indicator Indicates camera night vision mode is turned on. The screen will appear in Black/White in this mode. How to use the indicator VOX On b c Indicates you select Low Sound level detection or High Sound level detection in VOX menu. Monitor Speaker Mute Indicates the monitor speaker is muted.
How to use the setup icon Menu Operation After configuring the settings, press the [ How to use the function tools To return to the Live screen, press the [ ] icon to save the changes. ] icon. b c Press the screen of the monitor to display the menu screen. 6HWWLQJV 03 c Adjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera. Navigation Controls Using the navigation [ zoom mode.
Camera VOX Sensitivity ] icon is not displayed. If not in “VOX” mode, [ In VOX mode, you can select “Low Sound Level Detection” or “High Sound Level Detection”. If set to “Low Sound Level Detection”, monitor can be triggered by lower audio level than “High Sound Level Detection” setting. o Audio Only Mode :Video will turn on 30 seconds and then video will turn off, monitor speaker is still playing camera background sound.
OVERVIEW Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls 04 When the monitor is being recharged or monitor has low electricity, red light flashes. When the monitor is working, the LED becomes solid red light. 5" LCD Screen Microphone Displays video from the camera. Transmits audio to the camera when [ ] icon is pressed down and held like a walkie talkie.
Back Controls Power On/Off Turn on/off the wireless monitor. Speaker Produces the sound transmitted from the camera(s). DC 5V Power Input Connect the included AC power adapter to power and/or charge the monitor battery. (when the monitor is not placed in the optional Charge cradle). n ` 12 · Overview You must have more than one camera configured on the system when using the functions that requires more than one camera.
Wireless Camera Front & Back Controls IR LEDs Camera Antenna Infrared LED’s provide viewing in no / low light conditions. Sends & receives signals to or from the monitor. Microphone Speaker Produces the sound transmitted from the monitor. 04 Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Overview Side & Bottom Controls Night vision sensor PAIRING Button Detects light levels where the camera is placed. Press this button to pair with a monitor.
INSTALLATION 1. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. How to Install 2. Mount the camera to the wall. Mark the position of the screw holes on the wall, and drill holes and insert 2 screws, then firmly attach the camera to the wall by placing the stand over the installed screws and pushing the base downwards.
APPENDIX Item Item Details System General Details Operating Temperature Range 0°C~+40°C Operating Humidity Range 85% RH Environment Rating Indoor use only Pan Angle Not support Tilt Angle 100° Regulation Compliance FCC/CE Operating Frequency Range 2400 MHz~2483.5 MHz RoHS Compliance Yes for CE version only Transmitting Power 16.6 17dBmdBm Max Max.
Item Details Audio Built in Microphone/ Speaker Other Special Feature Volume control, Pairing Battery Type Li-on Battery Capacity 2500mAh, Replaceble Battery time duration Min 4 hours Weight 239g (battery inside) Troubleshooting Problem Solution No picture from a camera 1. 2. 3. 4. 5. Check all connections to the camera. Make sure the adapter is plugged in. Make sure that the cameras and monitor are both ON. Make sure that the camera is in range of the monitor.
Samsung cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.
TEMPLATE This template is used to install the camera on the wall.
MEMO
SALES NETWORK HEAD OFFICE 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Customer support : +1-877-349-3149 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Customer support : 00800-8010-8022 www.
