User's Manual

11
03
Menu Operation
Menu Operation
How to use the buttons to setup
Press [MENU] button to enter the menu setting or exit the menu setting.
Move to other menu by press [A] or [M] key.
Press the [
] button for option selection mode.
Adjust option level by [+] or [–] key.
Press the [
] button to complete.
Brightness
Adjusts the brightness of the image.
1.
2.
3.
4.
5.
Menu operation
Zoom
Zoom in 1x or 2x of the video image.
In double size mode, press the navigation control
buttons to pan up/down and left/right while viewing
live image.
Power Saving
Enables receiver power save mode (when no activity
on the camera is detected).
The Power Saving Menu is used to turn off the screen
at a predetermined time, to conserve battery power.
After selected time, the monitor will go to a select
screen saver or black screen if blank is selected as
the screen saver.
Power Saving mode will be deactivated by pushing
any key on the front panel of monitor or by higher sound detected by cameras.
If Power Saving mode is deactivated by pushing [A], [M] and [SLEEP], the monitor will
go back to black screen after the time you set if there is no sound trigger during that
time.
If Power Saving mode is deactivated by a sound trigger, the device will go back to
black screen approximately 8 seconds after the last trigger.
Screen Saver
After selected time, the monitor will go to a select
screen saver or black screen if blank is selected as
the screen saver.
► ► ► ►
Enter menu
setting
Move to a
menu
Select the
menu
Adjust level Save the
change