WIRELESS MONITORING SYSTEM User Manual SEW-3022WN , SEB-1016RW
Wireless Monitoring System User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product.
Getting Started What’s Included The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 100m/330ft wireless open space transmission range. The actual range may vary depending on the use environment. • Listen in with exceptional sound clarity • Safety warning feature on monitor notifies you when the camera is out of range of the transmitter.
Getting to know your Monitoring system Wireless Receiver Front & Back Controls Speaker Produces the sound transmitted from the camera(s). Receives and sends signals from or to the camera. 2.5” LCD Screen Navigation Controls/ Belt hanger SEW-3022 Button Use the controls to move and select while in Viewing Mode and Menu Mode. Play/Stop Used to play or stop playing the recorded data. MENU Button Press to access the receiver menu. Press the button again to exit.
Side Controls Talk Button Night Light Button Press down and hold the button to talk back to the camera currently being displayed on the LCD screen. Press to remotely turn on/off the night light on the camera (for the camera currently being displayed on the LCD screen). When the night light is on, an indication icon will be displayed on the LCD screen. A/M record Receiver ON and low battery indication Press to auto record or manual record during monitoring.
Front & Back Controls Camera Antenna Sends & receives signals to or from the receiver. Charging Indication LED LED is off when there is no rechargeable battery inside the camera base; the LED is red when the rechargeable battery pack is charging; the LED turns off when the rechargeable battery is fully charged. n ` ` ` Temperature Sensor Gives an indication of the air temperature where the camera is placed.
To Use The Battery Mode You can use the battery to power the camera if it’s distant from the power source or if you want to carry the camera. n ` This camera has built-in IR LED’s, which provides the camera with the ability to view images in no/low light conditions. It is important to use the provided power adapter (and not the batteries) when using the camera for prolonged periods in low light conditions, as the built-in IR LED’s will deplete the battery more quickly than regular daytime use.
Installation 2. How to Install Caution if you use the system to watch a young child, do not place the camera where the child can reach. Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` 3. ` Adjust the viewing angle of the camera n ` Do not pull up the stand lever with an excessive force. Otherwise, it may be broken.
Viewing Mode Display Wireless Receiver Night light If you press [ ] in the wireless receiver or wireless camera, the night light of the wireless camera turns on with the applicable message. Auto Mute If you set Auto Mute to , the applicable message appears on the screen. SEW-3022 Micro SD card status Indicates when a Micro SD card is inserted. It displays the recording type if you press record button. A/M record Press to auto record or manual record during monitoring.
Menu Operation After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. Power Saving mode will be deactivated by pushing any key on the front panel of monitor or by higher sound detected by cameras. If Power Saving mode is deactivated by pushing [A], [M] and [SLEEP], the monitor will go back to black screen after the time you set if there is no sound trigger during that time.
Date Setting Sets the year, month, date value to show in the monitor screen. Date Format Sets the date format to show in the monitor screen. Time Setiing Sets the time value with hour, minute to show in the monitor screen. Pairing You can register a wireless camera with the receiver using the registration menu where you can view the video of the selected wireless camera. Pairing The system comes with a camera that has already been paired with the receiver unit.
Appendix Specifications Item Hardware and CD driver installation 1. 2. Put CD into CD ROM on computer and click the icon of Install USB Driver to run installation program. Click the > button to continue Transmit Frequency Range 2.0 Mbps Transmitting Power 15dBm (MAX) Modulation Type GFSK Image Sensor Type Press the button to complete the driver program. 6.
Troubleshooting If you have problems with the system, there is often a quick and simple solution. Please try the following: Problem No picture from a camera Solution 1. 2. 3. 4. 5. Check all connections to the camera. Make sure the adapter is plugged in. Make sure that the cameras and receiver are both ON. Make sure that the camera is in range of the receiver. If using the battery adapter, try replacing the batteries. Make sure the camera and monitor are paired. The picture is dropping 1.
67mm [2.6 inch] Screw holes for the Camera installation TEMPLATE This template is used to install the camera on the wall.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com SAMSUNG TECHWIN EUROPE LTD.
