Super High Resolution WDR Dome Camera User Manual SCD-5083
Super High Resolution WDR Dome Camera User Manual Copyright ©2014 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9.
safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
important safety instructions 1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
contents introduction 9 10 11 Features Components and Accessories Component names and functions Installation 12 12 14 Before installation Installation Adjusting the monitoring direction for the camera connection 15 15 16 Connecting to Monitor Connecting to Power Using Coaxial Communications camera operation 18 18 Menu Configuration Menu Setup troubleshooting 34 Troubleshooting specifications 35 37 Specifications Dimension 9 12 15 18 34 35 _ contents
introduction Features Excellent Sensitivity The built-in high sensitivity COLOR CMOS produces a clear image. - Color : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE) B/W : 0.003Lux (F1.2, 50IRE), 0.0001Lux (1sec, F1.2, 50IRE) 0.001Lux (F1.2, 30IRE), 0.00003Lux (1sec, F1.2, 30IRE) Intelligence Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved.
introduction Miscellaneous Functions HLC(High Light Compensation), REVERSE , D-ZOOM, SHARPNESS and PRIVACY functions are provided. Communication Coaxial communication methods are supported. - Coaxial Communications : Pelco Coaxitron OSD The camera’s OSD is complimented by 17 languages.
Component names and functions 3 2 4 ● introduction 1 5 6 SET VIDEO 7 ⓬ ⓫ ❿ 9 8 2S hield Case 1 Dome Cover 3 Rotate base : control rotating angle of camera. ➍ Vari-focal Lens Module : 2.8 ~ 10.5mm (F1.2). 5 Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. 6 Video Output Terminal to Monitor 7 Pan Base : Control panning angle of camera.
Installation BEFORE INSTALLATION Ensure you read out the following instructions before installing the camera: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
Installation ● Installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. Set the mark imprinted on the camera to face the direction of camera monitoring. TOP FRONT 3. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. 4. Attach the dome cover and the shield case to the main body.
Installation Adjusting the monitoring direction for the camera Pan TOP FRONT Tilt Lens rotation Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. - The effective range of pan is a total of 354 degrees. - The effective range of rotation is a total of 355 degrees.
connection Connecting to Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. ● connection Monitor SCD-5083 A s the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. Connecting to Power You can connect power as shown in the following figure.
connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) #18 (0.83mm2) Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 A s shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
- Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. 300m M Recommended Cable Specification 3C2V(RG-59/U) 450m 5C2V(RG-6/U) 600m 7C2V(RG-11/U) It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.
camera operation Menu Configuration MAIN SETUP PROFILE ● BASIC ● ITS ● DAY/NIGHT ● INDOOR ● BACKLIGHT ● USER SSDR ● ON ● OFF WHITE BAL ● ATW ● MANUAL ● OUTDOOR ● AWC SET ● INDOOR ● MERCURY EXPOSURE ● BRIGHTNESS ● AGC ● LENS ● SSNR4 ● SHUTTER ● RETURN BACKLIGHT ● OFF ● WDR ● USER BLC ● HLC SPECIAL ● DISPLAY ● DAY/NIGHT ● DIS ● COMM ADJ ● IMAGE ADJ ● DEFOG ● PRIVACY ● VIDEO ANALYTICS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET Menu Setup For function setting, you can use the function s
MAIN SETUP Select the function using the Function Setup switch. ▶ 1. PROFILE 2. SSDR 3. WHITE BAL BASIC Change the status using the Function Setup switch. ON ATW 5. BACKLIGHT ● Camera Operation 4. EXPOSURE OFF 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. Main SETUP menu is displayed on the monitor screen. 2. Select a desired function using the Function Setup switch. Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4.
camera operation INDOOR : It will be set automatically to help you take a picture in a regular indoor lighting condition. USER : Automatically configures the camera to your custom settings. 1) Select Custom for Simple Setup mode. 2) Configure the menu options to your custom settings. 3) The settings are automatically saved as Custom mode. 4) Profile user mode don't initialize when menu resets. 3. In the PROFILE menu, you can confi gure the following camera settings at once.
White Bal (White Balance) Use the White Balance function to adjust the screen color. 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1. PROFILE 2. SSDR ▶ 3. WHITE BAL BASIC ON ATW ※ Select one of the following 6 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K. OUTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(including Natrium).
camera operation EXPOSURE 1. W hen the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the EXPOSURE SETUP Function Setup switch. BRIGHTNESS : Adjusts the video brightness. LENS : U sing this function, you can control the screen brightness. -------▶ 1. BRIGHTNESS 2. LENS 3. SHUTTER 4. AGC 5. SSNR4 6. RETURN 50 DC HIGH ON - DC : Select Auto Iris Lens.
BACKLIGHT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. USER BLC : Enables a user to select a desired area on a picture and view that area more clearly. - L EVEL : Adjusts the brightness level of a monitoring area. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. - RETURN : Return to the MAIN SETUP menu.
camera operation WDR : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. - LEVEL : S elect one from low, med, high to adjust the brightness of the WDR setup. WDR SETUP ▶ 1. LEVEL 2. RETURN MIDDLE - RETURN : Return to the MAIN SETUP menu. M In WDR mode, the max/min shutter value is set to 1/2 to 1/240. In WDR mode, there can be noise between a bright and dark area.
SPECIAL 1. W hen the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. DISPLAY ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DISPLAY’. ❷S elect a desired mode using the Function Setup switch. SPECIAL SETUP ▶ 1. DISPLAY 2. COMM ADJ 3. IMAGE ADJ 4. DAY/NIGHT 5. DEFOG 6. PRIVACY 7. DIS 8. VIDEO ANALYTICS 9.
camera operation - FONT COLOR : Y ou can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. COMM ADJ (Communication Adjustment) : - COAX : You can select whether to use COAX communication. - RETURN : Return to the SPECIAL menu. COMM SETUP ▶ 1. COAX 2.
DAY/NIGHT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. - AUTO : T he mode is switched AUTO SETUP to ’Color‘ in a normal ▶ 1. BURST MODE ON environment, but 2. DURATION NORMAL switches to ’B/W‘ mode 3. DWELL TIME 30 SEC when ambient illumination 4. RETURN is low. To set up the switching time for AUTO mode, press the Function Setup switch.
camera operation - EXTERN : Ground to the grounding terminal to allow automatic switching between COLOR and B/W (Black/White). - COLOR : The picture is always displayed in color. - B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. DEFOG : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility.
- SEL POS/ XPOS/ YPOS : A djust the size and position of the selected area. - RETURN : Return to the SPECIAL menu. VIDEO ANALYTICS ❶ I f the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘VIDEO ANALYTICS’. ❷S elect a desired mode using the Function Setup switch. VIDEO ANALYTICS OFF OFF OFF ▶ 1. TAMPERING 2. MOTION 3. INTELLIGENCE 4. RETURN - TAMPERING : If the screen view TAMPERING is obstructed or the ▶ 1. SENSITIVITY camera location 2.
camera operation - MOTION : T his product generates signals each time an object movement is detected in the four areas of the screen so efficient monitoring can be achieved. MOTION DET ▶ 1. DET. SIZE 2. DET. AREA 3. NON DET. AREA 4. INDICATOR 5. ALARM OUT 6. RETURN OFF DET. SIZE : S elects an object size to detect on the screen. DET. AREA : Set the areas of MOTION DETECT AREA motion detection. ▶ 1. SEL AREA AREA1 SEL AREA : S elect from four 2. MODE ON areas that users -------3.
- INTELLIGENCE : S et the intelligent video detection function. 5 -------- 2. DET. SIZE 3. FENCE 4. APPEAR 5. INDICATOR 6. ALARM OUT 7. RETURN OFF DET. SIZE : S elects an object size to detect on the screen. FENCE SEL FENCE : You can select VIRTUAL FENCE up to 4 FENCE. ▶ 1. SEL FENCE FENCE1 etermines whether MODE : D 2. MODE OFF to use the fence 3. TYPE LINE selected in the 4. POSITION FENCE. 5. COUNT OFF TYPE : Two types, line and 6.
camera operation 2) AREA FENCE - SEL POS : Selects a AREA FENCE position from ▶ 1. SEL POS POS1 POS1 ~ POS4. -------2. X POS 25 - X POS / Y POS : Adjust -------3. Y POS 25 the size and position of the 4. DIRECTION IN selected area fence. 5. RETURN - DIRECTION IN : Detects objects entering the fenced area. OUT : Detects objects exiting the fenced area. IN/OUT : Detects all objects entering and exiting the fenced area. - RETURN : R eturn to the VIRTUAL FENCE menu.
If the camera shoots an object a short distance away, the video analysis function can be degraded. In the following cases, motion detection or video analysis event performance can be degraded or malfunctions can occur. - If an object’s brightness or color is similar to that of the background - If multiple movements keeps occurring randomly, such as scene switching or sudden light changes - If an object fixed in the same location keeps moving - Moving away from the camera or approaching the camera.
troubleshooting Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are properly connected. Check that you have properly connected BNC cable to the camera. Check the type of lens. The image on the screen is dim.
specifications Specifications SCD-5083N SCD-5083P Video 1/3” 1.3M CMOS Total Pixels 1312(H) x 1069(V) Effective Pixels 1305(H) x 1049(V) Scanning System Progressive Scan Synchronization Internal H : 15.734KHz / V : 59.94Hz Color : 1000 TVL Horizontal Resolution B/W : 1000 TVL Frequency H : 15.625KHz / V : 50Hz Min. Illumination Color : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE) B/W : 0 .003Lux (F1.2, 50IRE), 0.0001Lux (1sec, F1.
specifications SCD-5083N SCD-5083P Contrast Enhancement SSDR ( Off / On ) Digital Noise Reduction SSNR4 ( Off / On ) Defog AUTO / MANUAL / OFF Purple Fringe Reduction Purple Fringe Reduction ( Off / Low / Middle / High) Digital Image Stabilization Off / On Tampering Off / On Motion Detection Off / On Intelligent Video Fence, Apear_Disappear, Counting ( Off / On ) Privacy Masking Off / On (24 programmable zones with 4points polygonal masking) Gain Control Off / Low / Middle / High White B
Dimension Unit: mm ● specifications English_37
MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.
