User's Manual

《131》
Set USB
ㆍ [USB] sub menu and connected device are not matched.
→ Reconfigure [USB] in the [Setup] menu.
Out Of Number
ㆍWhen selecting too many printing pages in the PictBridge menu.
→ Select printing page within the limitation.
■ Please check the following
The camera doesn’t switch on
ㆍThere is low battery capacity.
→ Insert charged battery.
ㆍBatteries are inserted incorrectly with the reverse polarities.
→ Insert the batteries according to the polarity marks (+, -).
The camera power ceases while in use.
ㆍThe batteries are exhausted.
→ Insert charged battery.
ㆍThe Camera is turned off automatically.
→ Turn off the camera power and turn it on again.
Batteries drain quickly
ㆍThe Camera is being used in low temperatures.
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in
order to take images.
Before contacting a service centre
Warning indicator