User's Manual

《122》
■ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD for the duration set in the [Quick View] setup. Quick view is possible
only with still images.
● How to set the quick view
1. Press the Menu button and select the [ ] menu tab by
pressing the Up/ Down button.
2. Press the Right button and select the [Quick View] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu by
pressing the Up/ Down button.
[Off] : The quick view function can’t be activated.
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
4. Press the OK button to set the setting.
Sound
Brightness
Video Out
Quick View
Rotating
USB
Reset All
Off
0.5 sec
1 sec
3 sec
5 sec
Quick view