User's Manual

《109》
■ Initialises user-changed configurations.
1. Connect the camera to your printer. The USB menu
must be set to [Printer] before you connect the camera
to the printer. (See p.83)
2. Select the [Reset] menu by pressing the Left/ Right
button.
3. Press the Right button and select a desired sub menu
by pressing the Up/ Down button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : Press the OK button and a confirmation window will display.
Press the OK button again and all print and image settings will be reset.
※ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
사용자 설정
출력
초기화
이미지
자동 설정
아니오
예
PictBridge : RESET