User's Manual

《108》
■ Printing Pictures
1. Connect the camera to your printer. The USB menu
must be set to [Printer] before you connect the camera
to the printer. (See p.83)
2. Select the [Print] menu by pressing the Left/ Right
button.
3. Press the Right button and select a desired sub menu
by pressing the Up/ Down button.
[Standard] : Print the pictures stored in the memory card
in set numbers. One picture is printed on one piece of paper.
[Index] : Print multiple images on one sheet of paper.
1. Connect the camera to your printer. The USB menu
must be set to [Printer] before you connect the camera to
the printer. (See p.83)
2. Select the [DPOF Print] menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/Down
button and press the OK button.
[No] : Cancel the printing
[Yes] : Directly print the file with the DPOF information
※ With a printer without supporting the DPOF, the menu is still displayed but not available.
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected,
the [No image!] message will be displayed. Press the
Menu/ OK button while printing to cancel the printing
and the [Print] menu is displayed.
※ Depending on the manufacturer and printer model,
some menus may not be available.
■ DPOF Print : This allows you to directly print the files with DPOF information.
자동 설정
사용자 설정
출력
초기화
이미지
표준
사용자 설정
출력
DPOF

출력
초기화
이미지
자동 설정
출력?
예
아니오
출력:OK
아니오
예
PictBridge : Printing