User's Manual

《106》
■ Select pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [Printer] before you connect the camera to the
printer. (See p.83)
2. Press the Menu button and select the [ ] menu tab
by pressing the Up/ Down button.
3. Press the Right button and select the [Images] menu by
pressing the Up/ Down button.
4. Press the Right button and select a desired sub menu by
pressing the Up/ Down button.
When [One Pic] is selected : The PictBridge function will be applied only to the picture
currently displayed.
When [All Pics] is selected : The PictBridge function will be applied to all pictures, excluding
RAW, TIFF and movie clips files.
[ When [One Pic] is selected ] [ When [All Pics] is selected ]
- Press the Up/ Down button to select the number of prints.
- When you select [One Pic] menu, use the Left/ Right button to select another picture and
select the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
사진 이동:◀▶ 설정:OK
● Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will
appear as shown below.
■ Easy printing
When you connect the camera to printer in the Play back
mode, you can print a picture easily.
- Pressing the shutter button : Currently displayed image
will be printed with the
printer’s default setting.
- Pressing the Left/ Right button: Selects a previous/ next
image.
100-0009
출력
초기화
이미지
자동 설정
사용자 설정
한장
전부
사진 이동:◀▶ SHUTER:출력
출력?
0 Prints
출력?
0 Prints
Set:OK
PictBridge : Picture Selection