User's Manual

PictBridge : RESET

Initializes user-changed configurations.

1. Connect the camera to your printer. The [USB] menu

must be set to [PRINTER] before you connect the

camera to the printer.(See p.58)

2. Use the LEFT and RIGHT buttons to select the [RESET]

menu tab.

3. Use the UP and DOWN buttons to select the desired

submenu value, and then press the OK button.

- If [YES] is selected : All print and image settings will be

reset.

- If [NO] is selected : Settings will not be reset.

Default print setting varies depending on the printer manufacturer.

For your printer s default setting, refer to the user s guide that came with your printer.

RESET

YES

MOVE: SET:OK