User's Manual

76
PictBridge: Printing
Printing Pictures
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.58)
2. Use the LEFT and RIGHT buttons to select the [
PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[STANDARD] : Print the pictures stored in the
memory card in set numbers.
[Index] : Print multiple images on one sheet of paper.
[Cancel] : Cancel the picture printing
Uca3 61
PRINT
STANDARD
INDEX
CANCEL
MOVE: SET:OK
DPOF PRINT
OK
CANCEL
MOVE:
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.58)
2. Use the LEFT and RIGHT buttons to select the [ DPOF
PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[Yes] : Directly print the file with the DPOF information
[No] : Cancel the printing
Depending on the manufacturer and printer model, some menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
NOW PRINTING
CANCEL:OK
1/1
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the [NO
IMAGE!] message will be displayed. If you press the
MENU/OK button during printing, printing will be cancel
and the menu from Step 2 will appear.
Number of pictures in a index print varies depends on
the printer used.
DPOF PRINT : This allows you to directly print the files with DPOF information.