User's Manual

39
MF button
The manual focus function is disabled in the AUTO and VOICE RECORDING mode.
The MF bar is divided into 3 parts according to the photography range.
When the photography range is within 0.06m ~ 0.3m, the flash mode is changed to
FLASH OFF automatically.
The focus value displayed in the LCD while manually focusing is measured from the end
of the lens.
INFORMATION
Part of the MF bar Photography range
1st part 0.8m ~
2nd part 0.3m ~ 0.8m
3rd part (only in wide zoom mode) 0.06m ~ 0.3m
The MF button is used as described below in A/S/M mode.
A mode(Aperture priority mode)
1. Press the MF button. Aperture value in the LCD goes red.
2. Use the Left/Right buttons to set the desired Aperture value.
3. During the super macro, continuous shot, manual focus (6 to 30cm), movie clip mode, the
flash function will not operate.
- Pressing the MF button: Saves the new aperture value and displays the focus adjust icon
( AF ). To set manual focusing, set the distance as shown in page 38.
To set automatic focusing, press the MF button again.
- Pressing the Menu/OK button: The camera goes into
shooting mode after saving the new aperture value.
* Smaller Aperture values make the object sharp but blur
the background.
Larger Aperture values make both the object and
background sharp.
* Toggle the MF button in step 1 to select Aperture set
(Red) Focusing (AF Red) Aperture priority mode
(White)