User's Manual

15
Connecting to a Power Source
Charging with the camera
- Insert the rechargeable battery into the
battery chamber.
- Put the SAC-41 (for both Charger and AC
adapter) into the socket and DC input
connection point of the camera.
Always turn off the power before taking the SAC-41 (for both Charger and AC adapter)
out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use the SAC-41 (for both Charger and AC adapter) or TTA
standardized chargers with the correct specification for the camera. Failure to do so may
affect your warranty.
Do not use the flash frequently or take many pictures with the fully discharged
rechargeable battery charged for a short time. Even if the charger is inserted, the camera
power may be turned off because the rechargeable battery is discharged again.
DANGER
Charging with the cradle
- Insert the rechargeable battery into the
battery chamber.
- Place the camera correctly in the cradle.
- Put the SAC-41 (for both Charger and AC
adapter) into your power socket and DC
input connection point of the camera.
How to charge the rechargeable battery (SLB-1137)